- Birch vs Aspen - November 7, 2022
- How to Treat Chainsaw Rust - August 8, 2022
- Firewood Delivery: Where to Buy Firewood Online 101 - May 8, 2022
Chainsaws are used for cutting wood, trees, and logs regularly. However, if you use your chainsaw for personal or professional use, you will have to deal with the adverse effects of rust buildup sooner rather than later.
These forestry tools need to be cleaned and maintained regularly to prevent dirt from accumulating and causing them to break down from the inside out. Learning how to treat chainsaw rust is crucial if you want your chainsaw to last as long as possible. Many believe chainsaws are meant to be used for a lifetime, but this isn’t the case. If you abuse your chainsaw, it will not last as long as it could have.
Key Details Up Front
There are a few different ways to treat chainsaw rust, but they can be broken down into two main categories. These are preventing chainsaw rust and treating chainsaw rust once it has occurred. The method you choose depends on the buildup’s severity and time constraints.
If you have a severe chainsaw rust buildup, you may consider taking it to a professional. However, if you don’t feel like shelling out a lot of money, you might try using a cleaning agent like Evapo-Rust Super Safe Rust Remover. Just put it on the chainsaw and let it do its thing. It doesn’t take long for it to work and doesn’t require a lot of scrubbing or brushing.
Keep the Chainsaw Clean
Chainsaws are meant to be used with a lot of dirt, so you must keep them clean. If you use your chainsaw for personal or professional use, then you should clean your chainsaw at least once a week. The more dirt on the chain, the more likely it will break down from the inside out.
Ensure all the ground and debris are removed from your chainsaw before every use. If you have a problem with rusted chainsaws, you should also take them to a professional for cleaning and maintenance. Most chainsaws are maintenance-free, but this is not always the case. Treating chainsaw rust is crucial if you want your chainsaw to last as long as possible.
Use Rust Inhibitors
Chainsaws are meant to be used with a lot of dirt and debris, so you need to use a rust inhibitor. Rust inhibitors are designed to prevent your chainsaw from rusting. There are several rust inhibitors for chainsaws, but the most common is oil. Oil is used on the chain and cover to prevent debris from causing problems with the chain.
Fat can also be used on other parts of the chainsaw that can get dirty, such as oiling your saw’s chain and bar. If you use your chainsaw for personal or professional use, then you should use the oil regularly on your existing chainsaw and in your saw’s chain and bar. This will help to keep them from breaking down from the inside out sooner rather than later. Some of the best rust inhibitors include:
Fluid Film Protectant and Lubricant
This product is applied to the saw’s chain and bar. It helps to protect the chain from rust by preventing it from getting dirty. It also keeps the chain and bar running smoothly, so you can use your chainsaw for longer without worrying about breaking down.
Dupli-Color Exact-Match Scratch Fix
This perfect product allows you to use your chainsaw for a more extended period before breaking it down. In addition, it protects your saw’s chain and bar by preventing rust from forming. It can also be used on other parts of the chainsaw that can get dirty, such as oiling your saw’s chain and bar.
WD-40 Specialist Long Term Corrosion Inhibitor
Corrosion Inhibitor WD-40 is a product designed to protect your chainsaw from rust. It can be used on other parts of the chainsaw that can get dirty, such as oiling your saw’s chain and bar.
CRC White Lithium Grease Spray
CRC White Lithium Grease Spray is an excellent product in your garage or toolbox to help prevent rust and lubricate hinges, latches, and other similar mechanics on your vehicle, truck, or crossover. This aerosol can contain high-purity lithium-based lubricants, oxidation inhibitors, and a precision needle tip.
Use the Right Cleaner
If you want your chainsaw to last as long as possible, then you need to buy a chainsaw chain cleaner. Chainsaw cleaners are specifically designed to remove rust and dirt from your chainsaw’s teeth. They are easy to use and will also help your chainsaw last longer than if you didn’t use one.
They can be used with any chain and are very cheap, so it is worth buying one. The proper cleaner is usually made of metal, so it will not harm your chainsaw. Many people use their chainsaw cleaners to clean their chains, but this is not recommended. If you want your chainsaw to last as long as possible, then you should not use it on your chain.
You are better off using it on the teeth of your saw. This will help prevent rust and dirt buildup and keep your chainsaw in good working condition. According to recent research, a chainsaw cleaned and maintained regularly can last between 5-10 years.
Oil Them Properly
Oil is a crucial part of how to treat chainsaw rust. You will want to make sure that you oil your chainsaw correctly. It’s best to use a chain oil designed for your specific chainsaw model. If you have a chainsaw with an oil drain hole at the bottom, you may want to take the chainsaw apart and dip the entire chain in a container of oil.
This will help prevent the oil from leaking out of the drain hole. Many people will use an oil container and pour oil directly into the chainsaw’s chain. This is a bad idea and can cause the chainsaw to rust even more. You should always consider the type of chainsaw you have because some chainsaws have an oil specifically made for them.
Find a Suitable Hard Spot for Your Chainsaw
Chainsaw rust is a very unpleasant problem to deal with. If you leave your chainsaw in one place for an extended period, it will start to rust. You don’t want this to happen. This can cause damage to your chainsaw and make it more difficult for you to work on it.
If you need tips on finding a suitable hard spot for your chainsaw, check out our article, “How To Find A Suitable Hard Spot For Your Chainsaw.” It contains the best advice, so you should give it a read if you are having trouble finding a suitable hard spot for your chainsaw.
How Do You Remove Rust from a Chainsaw?
There are many different ways to remove rust from a chainsaw, but the best way is to use an oil that is specifically designed for your chainsaw. This will help prevent the oil from leaking out of the drain hole and causing damage to your saw.
If you have a chainsaw with an oil drain hole, you should take it apart and dip the entire chain in oil. This will help prevent rust and keep your chainsaw in good working condition. Here is a step-by-step guide on how you remove rust from a chainsaw:
Step 1: Create the Rust Removal Mixture
You will want to create the rust removal mixture and place it in a spray bottle. It would be best if you used a combination of at least 50% hydrogen peroxide mixed with 50% dish soap.
This is the best way to remove rust from your chainsaw because it will prevent the rust from returning. Also, it will help remove any remaining oil that may have been applied to your saw after you cleaned it.
Step 2: Disassemble the Rusted Parts
You will want to disassemble the chainsaw parts and place them into a plastic container. It would be best if you used a hammer and chisel to remove the rust from your saw. It would help if you did this by repeatedly hitting each part of the chainsaw with the hammer and chisel until they are spotless.
Step 3: Use the Mixture on the Rusted Parts
After removing the rust from the chainsaw parts, you will want to use the rust removal mixture on each. You should spray each slice with the mixture and leave it for at least 15 minutes. This will allow the variety to do its job and remove any remaining rust. After this, you should wipe each part down with a clean cloth to remove any excess oil that may have been left behind.
Step 4: Scrub with Water and Soap
After removing the rust from each part of the chainsaw, you should scrub them with warm water and dish soap. This will help remove any remaining rust from the saw. You should then dry each part off with a clean cloth and inspect it to see if any rust has returned. If so, repeat steps 1-4 until no more rust appears to be present on your chainsaw.
Step 5: Dry the Chainsaw
After you have cleaned your chainsaw, you will want to dry it off with a clean cloth. You should then inspect the saw to see if any rust has returned. Many people use a blow dryer to dry their chainsaws, which can damage the saw. If you notice any rust, you must repeat steps 1 -4 until no more rust is present.
Step 6: Clean the Engine and Oil
After you have removed the rust from your chainsaw, you will want to check the oil inside. You should also clean the engine with a cloth and some oil. This will help ensure that no more rust will appear in the future.
Step 7: Assemble the Chainsaw and Test It
Once you have cleaned your chainsaw, you will want to assemble it. You should then test it out to see if the rust has returned and if the saw will start. If so, repeat steps 1-6 until no more rust appears on your chainsaw.
Here are some frequently asked questions about what to do if you find rush on your chainsaw.
Question: Can you use WD-40 to Remove Rust from a Chainsaw?
Answer: Yes, you can use WD-40 to remove rust from a chainsaw. WD-40 is a very versatile product that can be used for many applications. However, it is not the best rust remover for a chainsaw. It can work, but it will not work as well as other products designed to remove rust from metal.
Question: What do you do if chainsaw rust returns?
Answer: If the Rust returns, it may be because you did not remove all of the Rust. You should repeat steps 1-6 until no more rust appears on your chainsaw. You may also need to refinish or repaint the chainsaw, depending on how much Rust has reappeared.
Question: Why does my chainsaw get dull so quickly?
Answer: If you find that your chainsaw is getting dull faster than you expect, there could be a few reasons. First, consult your chainsaw’s user manual to confirm that you’re using the correct file size for your chainsaw. Additionally, be sure you’re not pushing down too hard when cutting. Doing so creates thin edges and will cause your chainsaw to dull quickly.
Keep It Clean
By following the steps above, you should be able to remove rust from your chainsaw. If it does return, you will want to repeat these steps until no more rust appears. This should be enough to keep your chainsaw in good working order.
Many people will put their chainsaws in storage for the winter, so rust can start to form on the chainsaw. This is why keeping your chainsaw clean and free from rust is essential.